Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 09:53
The level of airtightness is increasing in newly built Australian apartments. An appropriate ventilation rate is needed to provide occupants with a healthy environment. In 2022, a significant proposed change in the Australian National Construction Code (NCC) would require building tested as achieving less than five air changes per hour at 50Pa to have a continuous flow exhaust.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 09:44
This paper shows the results of a survey conducted among 10 AIVC members countries about air quality in garages and current requirements and regulations in this regard. Large differences were found among countries, not only in terms of the scope of the regulations, but also in relation to the parameters that are considered.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 09:36
This paper investigates the relationship between indoor air quality (IAQ) and overheating in a temperate climate in Spain (Cfb attending to Koppen-Ggeiger classification), in dwellings located in residential buildings and without cooling systems.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 09:13
Energy efficient buildings are getting more and more airtight to avoid thermal losses through uncontrolled air leakage and rely more and more on mechanical ventilation to ensure a good indoor air quality. In practice ventilation systems are however not always perfectly installed, and several problems are often encountered on-site.
In France the new environmental regulation for new buildings RE2020 now includes a mandatory inspection of ventilation systems for non-residential buildings.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 09:04
In a context of energy savings, new buildings are becoming more and more airtight. The good indoor air quality (IAQ) relies therefore more and more on mechanical ventilation systems with specific air flowrates to be met. However, in practice, ventilation ductworks are not always very airtight. The numerous issues induced by leaky ductwork have been well outlined in the literature and summed up in (Leprince et al., 2020). Yet the awareness is not forthcoming, and on-site workers do not always realize the consequences of ductwork leakages.
Submitted by Maria.Kapsalaki on Fri, 03/03/2023 - 08:45
Indoor Air quality (IAQ) of dwellings is the result of several sources and processes, and the impact of ventilation system is the one amongst many others. Definition and metrics of IAQ are several and we choose in this study to focus on airborne particle levels. Our question was: How the filtration of supply air impacts particle levels in indoor air?
Submitted by Maria.Kapsalaki on Thu, 03/02/2023 - 12:29
Many European programs offer eco-conditioned financial aid to support public policies for the decarbonization of buildings. This is the case, for example, of the 2017-2022 ERDF Operational Program, which financially assists social project management for energy efficient refurbishment operations of its building stock. The eligibility conditions for financial aids concern the energy consumption, the thermal insulation performance of the building envelope and the energy efficiency of heating, cooling and ventilation systems.
Benjamin Jones, Dr.Eng., spoke with ASHRAE’s Technical Editor Rebecca Matyasovski about a proposed addendum to Standard 62.2 that considers harm as a basis of regulating contaminants in homes. He also talked about how this type of addenda could be used in other indoor spaces and by other organizations—and why you should always turn on your range hood.
On December 7, 2022 ASHRAE’s board of directors announced its commitment to support the expedited development of a national indoor air quality (IAQ) pathogen mitigation standard. The goal is to finalize the consensus-based, code enforceable standard within six months.