The principal environmental factors that affect human comfort are air temperature, mean radiant temperature, humidity and air speed. Presents asimplified model of thermal comfort based on the original work of Fanger, whorelated thermal comfort to total thermal stress on the body. The simplified solutions allow the calculations of predicted mean vote (PMV) and effective temperature which (in the comfort zone) are linear in the air temperature and mean radiant temperature, and quadratic in the dew point, and which can be calculated without any iteration.
Discusses reasons behind occupant ventilating behaviour, such as: 1. general attitudes, particularly regarding energy, 2. occupant requirements, 3. components of the habitat micro-climate, 4. optimum micro-climate and desired micro-climate, 5. means available in the habitat to modify the micro-climate - a. general means, b. ventilation as a specific means, 6. balancing requirements against means, 7.
50 occupants of terraced houses, divided into 4 groups, were surveyed three times in October 1981, February 1983 and March 1983. The first group had Isolair air heating and ventilating systems, and were well insulated with double glazing. The second group was heated by radiators and had the same insulation as group 1. Groups 3 and 4 had normal insulation. Results of the surveys are given. The air heating and ventilating system did not provide the level of satisfaction hoped for. The group with the air heating and ventilating system was surveyed again in March 1984.
In countries such as the United Kingdom that possess a temperate climate, the majority of buildings are not air-conditioned but depend upon natural ventilation and relatively simple heating systems. Openable windows are used to reduce the in
Building design and building construction technology has improved in the past decade and the concern over indoor air pollutants and their health effects has increased. A multi-point, multi-pollutant air sampling and analysis network was insta
The Swiss performance standard for energy conservation in buildings SIA 380/1 is explained. This standard leaves air infiltration and other detail decisions to planners if minimum performance levels are met. Calculation procedures for heat balances based on a standard occupancy are described. Tools to achieve optimum space heating and ventilation rates are explained. Instrumentation for checking the thermal performance of the house in operation is defined.
Possible health effects and changes in sensation of comfort among tenants after replacement of single glass windows in leaky frames with double glass windows in airtight frames have been studied. The study design was observational, and included a study group and a corresponding control group. The results indicate essential improvements of the indoor climate and of the health status of the tenants after replacement of the windows (i.e.
Describes a new procedure for predicting the thermal comfort of people in naturally ventilated buildings. The procedure starts by obtaining, for each important wind direction, velocity ratios between points of interest inside the proposed bu
Describes the work of the Department of Climate and Building Services of the National Swedish Institute for Building Research. Full scale trials, field measurement and measurement technology and methods applied to indoor climate are described. Research on airtight buildings, radon, air quality and efficient ventilation, occupant requirements and effects on human performance is also summarised. Dummies are used to measure heat transport to or from parts of the body, and for measurement of humidity.
Describes expectations people have of indoor climate. Notes that the quality of indoor climate has often taken second place to fashionable architectural and material considerations. Refers to concern for improved environment and awareness of formaldehyde, radon and other pollutants and the need for correct ventilation to achieve derived air quality. Provides guidelines for air quality, and the thermal environment in both housing and working premises.
Login