The design of ventilation equipment is important because it affects the ventilation performancedirectly. To improve the ventilation efficiency of the displacement ventilation, a new ventilation system was proposed in this study. The experiment was performed to measure the fume concentration and the visibility at four points under working conditions. In experimental results, the concentration of dust with a new ventilation system was decreased by about 42-60% compared to that of the existing system. The visibility was increased by about 11-18%.
Occupational hygiene conditions were examined in a welding shop after repairing the air-handling unit. Good indoor air quality was achieved with the new replacement ventilation system. The airborne dust concentrations varied from the detection limit of 0.1 mg/m3 to 0.8 mg/m3 at the stationary sites. Even the breathing zone concentrations of the welders remained below or equal to 2.1 mg/m3. The concentrations of carbon monoxide did not exceed the level of 1 cm3/m3.