English

The new Nicosia Town-hall is a very particular building. On the site where it is built, important antiquities were discovered during the first day of construction and the whole design was completely modified to fit to the new situation. The archaeologists continued to excavate 2/3 of the entire site and created an archaeological park in the centre of the town. The building area was constraint to the remaining land, and co-exists with the uncovered findings.

Low energy buildings, being highly insulated, are subject to important overheating risks. Thermal simulation as well as experimental studies have shown the large potential of ventilative cooling. One barrier against this approach is the difficulty of evaluating air flows. Appropriate calculation methods and characterization of openings are needed, so that these systems can be dealt with in design, regulation and certification tools.

Natural ventilation and dynamic temperature simulation of buildings was until now a priviledge of highly skilled building physicists. Combined simulation of both is even rarer. 

From January 1st 2013 on, the French energy performance regulation will demand that the airtightness level is justified and that airtightness of a building should be below 0,6m3/h/m² at 4Pa for single family housing and 1m3/h/m² for multi-family dwellings, resulting into an important growth in the airtightness market. It is the role of the State to accompany this market evolution and to supervise the quality of airtightness measurements used for the EP calculation. This is why it has been decided that there are two possibilities to justify the airtightness level of a building.

The efficiency of air-to-air heat recovery ventilation units is of great importance for EP calculations (energy performance of buildings) throughout Europe. Efficiencies compared on a reliable basis are also crucial for contractors and installers of such systems.

DIN 4108-7 requires a limit of q50 ≤ 3.0 m³/m²h for the air permeability of large buildings. Even stricter limits with respect to q50 can be found at DGNB [German Sustainable Building Council] and in the Swiss MINERGIE Standard.
It is the objective of this presentation to develop awareness of this topic in the audience and to give recommendations as to which limits can be applied to new building projects.

The aim of this paper is to investigate the influence of the selective ventilation in the thermal performance of modern naturally-ventilated houses built in the 1950’s and 1960’s in Goiânia, located in middle-west of Brazil. The selective ventilation is one of the passive thermal conditioning strategies recommended for buildings located in this city, in the summer.

Reliable airtightness data is needed to calculate the estimate of air infiltration and the thermal loads for building energy efficiency and indoor comfort. While useful information on air leakage in low-rise dwellings does exist, there is little data available on dwellings in increasing high-rise residential buildings (particularly ones with central core plan). In this paper, we conducted airtightness measurement using fan pressurization method for about 350 dwellings in 4 high-rise residential buildings in Korea.

Natural ventilation is increasingly considered a promising solution to improve thermal comfort in buildings, including schools. However in order to support its planning and implementation, quantitative analysis on airflow paths and heat-airflow building interactions are needed. This requires an adequate accounting of both internal effects, from building layout and structure, and external forcings from atmospheric factors.

Air quality in offices depends on the ventilation system ability to remove contaminants from the occupied zone. In a low polluted building air quality mainly depends on the human presence and carbon dioxide is normally used as indicator of human bioeffluents.