Airbase

AIRBASE is the Bibliographic Database of the AIVC. It contains publications and abstracts of articles related to energy efficient ventilation. Where possible, sufficient detail is supplied in the bibliographic details for users to trace and order the material via their own libraries. Topics include: ventilation strategies, design and retrofit methods, calculation techniques, standards and regulations, measurement methods, indoor air quality and energy implications etc. Entries are based on articles and reports published in journals, internal publications and research reports, produced both by university departments and by building research institutions throughout the world. AIRBASE has grown and evolved over many years (1979 to present day, over 22000 references and 16000 documents available online). For most of the references, the full document is also available online.

The AIVC website includes a protected content feature that provides access to AIRBASE. Access to the protected content is free of charge but requires you to register first.


 
As a consequence of the energy and environmental issues, it is necessary to reduce the energy consumption of buildings. So, the air tightness of building envelopes is being improved and the air change rate due to infiltration is decreasing.
A. Ginestet, D. Pugnet and L. Mouradian
French authorities have launched an extensive thermal renovation program aiming at retrofitting 4M dwellings over 10 years, with priority given to the most energy consuming ones.
S. Juricic, C. Hung, F. Boithias
Nowadays, important efforts are made to reduce the residential building energy consumption. In this context, a growing interest for heat recovery ventilation has been observed during the last decades.
S. Gendebien, E. Georges, L. Prieels and V. Lemort
Ensuring the thermal comfort and improving the ventilation effectiveness are important goals designing ventilation systems. This study describes effects if the ventilation system of a room is run in an instationary operation mode.
M. Schmidt, C.Kandzia and D. Müller
Roofs are the envelope component more severely hit by solar radiation in summer (1470 kWh/m2 on average in Italy), hence one may expect that using cool materials on the finishing layer of a roof should provide a significant reduction in the heat f
V. Costanzo, G. Evola, A. Gagliano, L. Marletta
Fixed shading systems are saving energy by reducing the cooling loads of the space they shade, but can be a source of energy losses due to the increased need of daylight that they create.
M. Mandalaki, T. Tsoutsos, N. Papamanolis
Worldwide the food system is responsible for 33% of GHG emissions. It is estimated that by 2050, total food production should be 70% more than current food production levels.
M. Kolokotroni, S.Tassou and B. L. Gowreesunker
There is a growing consensus that the climate is changing faster than at any time in the past millennium. This is likely to have major effects upon many aspects of the built environment.
J. Holmes, T. Taylor, J. Counsell
The Proceedings of the 34th AIVC Conference " Energy conservation technologies for mitigation and adaptation in the built environment: the role of ventilation strategies and smart materials", held in Athens, Greece, 25-26 September 2013.
AIVC
The paper focuses on the assessment of indoor comfort and the energy consumption in a University building, during winter and summer time.
D.K.Serghides, C.K.Chatzinikola, M.C.Katafygiotou
Much of the on-going discussion on urban heat island mitigation and proposed measures for cooling is based on case-studies taken at a specific scale and settings; the evaluation of the effectiveness of proposed cooling measures is therefore made u
M.K.A. Neophytou, E.Tryphonos, P. Fokaides, M. Sandberg, E. Batchvarova, H.J.S. Fernando, J. Lelieveld, G. Zittis
The thermo-hygrometric treatment related to the air change in buildings requires a relevant quota of the total energy demand for heating and air conditioning, especially when the ventilation exigency is significant.
L. Schibuola, C. Tambani
The raise of sustainability in the urban design is a key-factor for addressing the challenges in response to climate change, resource availability, environmental degradation and energy consumption.
N. Gaitani, M. Santamouris1, I. Pappas, C. Cartalis, F. Xyrafi, E. Mastrapostoli, P. Karahaliou, C. Efthymiou
The urban climate of high-density areas is often affected by an increase of the air temperature known as Urban Heat Island (UHI) phenomenon. 
F. Rossi, F. Cotana, V. Coccia, A.L. Pisello, E. Bonamente, M. Palombo
Owing to the growing concern about indoor air quality (IAQ) globally in hospitals, especially after the recent outbreak of diseases like severe acute respiratory syndrome (SARS), Swine Flu (H1N1) and other airborne infections such as Tuberculosis,
M. A. Mohammed, S. J. M. Dudek and N. Hamza
The deep hot hyperarid valley between Israel and Jordan presents unique design and construction challenges in terms of energy conservation and thermal comfort.
A. Cicelsky, I. A. Meir
Assessing thermal risk in urban areas is essential, as this can have major implications to human health and may influence quality of life in urban areas as well as the urban microclimate.
T. Polydoros and C. Cartalis
The European Union (EU) aims to a 20% reduction of the Europe's annual primary energy consumption by 2020. Furthermore, EU commits to reduce GHG emissions to 80-95% below 1990 levels by 2050.
T. Tsoutsos, S. Tournaki, Z. Urosevic, A. Derjanecz, C. Nunez, S. Pouffary, N. Claridge, S. Mauro, C. Rata, R. Morell and M. Biscan
The EPBD directive (91/2002/EU) paved the way for the European Union member states to develop and apply a holistic approach on the building’s energy performance.
S. Chadiarakou, A. Papadopoulos, M. Santamouris
In Japan, wooden detached residential houses are common; the wood components within a wall may undergo decay because of condensation in the wall or flushing defects, which can be a concern.
K. Lin, .S. Kato, T. Yoshidomi, K. Hiyama

Pages