durability

The Performance 2 project (2020-2024) is a French national research project that aims to evaluate the long-term performance and durability of Humidity-based Demand Controlled Ventilation (DCV) systems installed in two multi-family social housing buildings, located in Paris and Villeurbanne, France.

This paper presents a comprehensive evaluation of Relative Humidity-Controlled Mechanical Extract Ventilation (RH-MEV) systems installed in multi-family social housing buildings, focusing on the assessment of in-situ aging and the impact of maintenance on the performance of the system. Building upon the Performance 2 project conducted from 2020 to 2024, which evaluated the durability and performance of RH-MEV systems over a 15-year period, this study delves deeper into the longevity and maintenance aspects of these systems.

The DURABILITAIR project, conducted from 2016 to 2019, aimed to assess the durability of air sealing products used in building envelopes. Key findings were presented at the AIVC conferences in 2017 (Nottingham, UK) and 2019 (Ghent, Belgium). This research enhanced understanding of the in-situ characterization of air tightness evolution in homes over time and contributed to developing accelerated aging test protocols under controlled laboratory conditions. 

The Performance 2 project (2020-2024) is a French national research project that aims to evaluate the durability of Humidity-based Demand Controlled Ventilation (DCV) systems installed in two multi-family social housing buildings (Paris and Villeurbanne) over than 10 years ago. This evaluation includes the analysis of continuous measurements performed on the ventilation system (sensors located close to the air terminal devices) and two additional Indoor Air Quality (IAQ) campaigns including two other monitors placed in the “dry” rooms conducted in 13 dwellings.

This work is part of two French research projects “Durabilit'air1” (2016-2019) and “Durabilit'air2” (2021-2024), that aim at improving our knowledge on the variation of buildings envelope airtightness through onsite measurement and accelerated ageing in laboratory-controlled conditions.   
During a past AIVC conference, a publication of the Durabilit’air1 project has presented and discussed an experimental protocol for characterizing assembly of products for buildings’ airtightness in laboratory controlled conditions.   

The content presented comes from the Technical Note (TN) 71 “Durability of building airtightness” published on Airbase, the AIVC bibliographic database.

The content presented comes from the Technical Note (TN) 71 “Durability of building airtightness” published on Airbase, the AIVC bibliographic database.

This work is part of two French research projects “Durabilit'air1” (2016-2019) and “Durabilit'air2” (2021-2024), that aim at improving our knowledge on the variation of buildings envelope airtightness through onsite measurement and accelerated ageing in laboratory-controlled conditions.   
The content presented in this paper is based on two publications in past AIVC conferences (Moujalled et al., 2019, 2018) and a research paper (Moujalled et al., 2021) about the mid-term and long-term changes in building airtightness through on-site measurements in low-energy houses. 

The content presented comes from the Technical Note (TN) 71 “Durability of building airtightness” published on Airbase, the AIVC bibliographic database.

Humidity-based DCV systems have been widely used in France for 35 years and are considered as a reference system, including for low-energy residential buildings. The on-going Performance 2 project delivers the new results of a thirteen-year monitoring in twenty-two social housing apartments. The involved consortium is composed of Cerema, Univ. Savoie Mont Blanc and two industrials partners: Aereco and Anjos.