low-energy buildings

We have developed a simple model to estimate ductwork leakage and heat conduction losses in steady-state conditions for a balanced ventilation system. Implemented in a spreadsheet, it allows us to calculate their impact on heat recovery efficiency consistently with EN 15241 without the need for a dynamic simulation tool. One case study shows that the global heat recovery of a balanced ventilation system with a nominal heat recovery of 80% can be reduced to less than 50% if the ductwork leakage and thermal resistance are poor.

The 2012 French thermal regulation will include a minimum requirement for residential buildings envelope airtightness, with two options to justify its treatment: a) measurement at commissioning or b) adoption of an approved quality management approach. This paper describes the qualification process for air-tightness measurement authorized technicians when their results are to be used in the EP-calculation method. Our analyses underline the importance of the qualification process to ensure homogeneous measurement practice among technicians.

It is foreseen that the 2012 version of the French regulation will include a minimum requirement for the envelope airtightness of residential buildings, with two options to justify its treatment: a) measurement at commissioning or b) adoption of an approved quality management approach. This paper describes the qualification process for authorizing technicians to conduct airtightness measurement when the result is to be used in the EP-calculation method. It also discusses the requirements set for approved quality management approaches.

In many locations mechanical ventilation has been the most widely used principle of ventilation over the last 50 years but the conventional system design must be revised to comply with future energy requirements. This paper examines the options and describes a concept for the design of mechanical ventilation systems with minimal pressure loss and minimal energy use.  This can provide comfort ventilation and avoid overheating through increased ventilation and night cooling.