Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:46
People spend 70% -90% of their time indoors. Indoor air quality and human body’s health have a close relationship. With the advance of society, user comfort requirements for thermal environment are rising. Humidity is an important parameter for evaluating indoor air quality, which not only affects the thermal comfort of the human body but also seriously restricts the function of the building. In winter, the indoor humidity is dry. When using humidifier, the humidity around the humidifier is higher, but there is still a dry area in the room.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:43
A demonstration house was previously built and commissioned in Iqaluit, Nunavut, Canada. The purpose of the overall effort is to evaluate the performance of a high-performance building located in the Canadian Arctic, while considering the unique social, economic and logistical challenges associated with its remote location. Previous work consisted of monitoring and reporting on the energy consumption due to heating between April 2016 and April 2017.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:41
The Arctic environment is challenging for housing ventilation and heating systems. Energy consumption and demand for space heating for northern remote community residential buildings are very high. Airtight built northern homes require energy efficient and effective ventilation systems to maintain acceptable indoor air quality and comfort, and to protect the building envelope from moisture damage.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:38
The work presented in this paper investigates frosting problem on high efficient air to air counter flow heat exchanger. The presented investigation consists of two main activities.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:36
Heat recovery ventilation (HRV) is one of the usual techniques (next to demand controlled) to reduce the energy impact of ventilation in buildings. For a given air change rate, the energy savings of HRV are in the first place dependent of the heat-exchanger efficiency, usually measured in standardized laboratory conditions. However, many other factors can have an impact on the overall system performance in practice.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:27
Various studies demonstrate a significant impact of ductwork leakage on the fan power consumption of ventilation systems. They have shown that the total energy used by fans can be reduced by 30-50% by improving the airtightness of the ductwork system. However, most of those studies focused on non-residential and multi-family buildings. This study focuses on single-family dwellings; specifically houses.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:24
Over the last few decades, there is a clear target for reducing energy needs in the building sector. The above objective can be achieved both by renovating the existing building stock and/or by constructing new buildings that will meet the characteristics of zero or nearly zero energy buildings. In order to construct or renovate a building into a zero or almost zero energy building, different passive, active and hybrid systems can be used. One such system is a solar air heater collector.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:22
Situated 1º North of the equator, Singapore has a year-round hot and humid climate with temperatures in the range of 25 and 32º C and relative humidity around 70%. In view of these environmental conditions, there is really no need for “Heating (or simply “H”) in the traditional Heating, Ventilating and Air-Conditioning (HVAC) terminology. Consequently, the term Air-Conditioning and Mechanical Ventilation (ACMV) is used in the local industry.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:20
An accurate temperature gradient calculation is essential for displacement ventilation (DV) system design, since it directly relates to the calculation of the required supply air flow rate. Inaccurate temperature prediction can cause the poor thermal comfort and w sizing of the ventilation and cooling systems.
Submitted by Maria.Kapsalaki on Thu, 02/06/2020 - 15:17
This paper presents a comparative study based on CFD simulation between the performance of Impinging Jet Ventilation (IJV) and Mixing Ventilation (MV) systems in providing indoor air quality and thermal comfort for a mechanically ventilated occupied large open plan office (floor-to-ceiling height > 5m). Large spaces differ from spaces with standard heights because of the significant upward stratification.