The purpose of the project has been to determine the saving in energy obtained in the practical operation of an FTX-system -that is, a fan-controlled supply and exhaust ventilation system with heat recovery - compared to an F-system, which is solely a fancontrolled exhaust system. The investigation, carried out in a terrace-house district in Skellefteg, showed the following savings for the FTX-systems in comparison with the F-systems: in 1-storey houses (81 m², airtightness approx. 1): appr. 1000 kWh/year in 2-storey houses (99.5 m², airtightness approx. 3) : appr. 1250 kWk/year.
Discusses insulation of lofts, roofs, walls, windows and floors, natural ventilation of dwellings and mechanical ventilation with heat recovery in dwellings. Considers cost benefits of weatherstripping and constant-flow ventilators for naturally ventilated houses. Concludes that installation of mechanical ventilation with heat recovery is uneconomic, but adding a heatexchanger to an existing mechanical ventilation system has economic benefits.
Ventilation requirements for the reduction of humidity. Required air change rates for hygiene and moisture removal for various rooms are given. Air flow rates are calculated for natural ventilation with closed windows, hopper windows and controlled ventilation. Ventilation by window opening is discussed. Gives examples of the transfer of moisture within a building, and the main reasons for ventilation, with particular emphasis on moisture removal. Lists danger of condensation on various building elements, causes and remedies. Advises on ventilation measures.
Research was undertaken to provide buildings equipped with mechanical exhaust ventilation systems or natural ventilation with reasonable draught-free efficient ventilation. One possible solution for existing detached houses and multi-storey residential buildings is a supply air window. Recent research in Finland shows that, for the best method, about 6.0 dm3/s of outdoor air per light area m2 can be taken in through the wooden construction double-paned window without draught. The incoming air was heated to about 50% of thetemperature difference between the inner and outer air.
A pilot study was conducted using workers from a semiconductor plant. Describes the methods used to acquire and evaluate air pollution exposure data for significant environments (including workplace, in-transit, and residence) to which workers are exposed throughout a typical 24-hour day. Summer andwinter measurements were made on products of combustion, radon, respirable particulates, and a variety of organic compounds including methylene chloride.
Since 1970 measurements of air change rate have been carried out in about one thousand buildings by the Swedish Institute for Building Research (SIB). In this paper we present results from these measurements. The studied buildings are of various design and have ventilation systems of different types, natural as well as mechanical. The buildings include single family houses, row houses, and multi family residential buildings, erected between 1900 and 1982. The measurements have then been carried out using tracer gas (decay) techniques to determine the rate of air exchange.
In 1981 Norwegian building regulations introduced quantitative requirements to air leakages in different types of buildings. The requirements were formed as maximum allowed air changes per hour at 50 Pa pressure difference according to the pressurization method. To evaluate the consequences of these new requirementsimposed to Norwegian building industry a model proposed by the Nordic Committee for Building Regulations (NKB) was used. The average air leakages of residential buildings , built before the new requirements,are known through a research project performed i n 1979.
Air infiltration typically accounts for a third of the energy loss in a heated building. The driving forces for natural air infiltration are wind and temperature differences. For a given combination of weather conditions the amount of air infiltration is determined by the character of the building envelope, mainly its airtightness. A useful technique in characterizing this housing quality is to measure air leakage. An air leakage standard for new construction has been in effect in Sweden since 1975.
A survey of literature on the theory and practice of residential ventilation. The three main topics are ventilation needs, air movement in buildings, and the properties of ventilation systems. The ventilation need under winter conditions is estimated at 0.35 l/s m2 or, for a dwelling with kitchen and bath, 35 l/s. In fact, ventilation requirements are not constant but it is difficult to find a formula covering the various considerations.
Diffusion-type passive monitors were placed for a two-week period in each of 303 residences in the New Haven (Conn.) area during a 12 week sampling period January to April 1983. For each home NO2 levels were recorded outdoors, and in three ro
Login