standard

Defines ventilation requirements for spaces intended for human occupancy and specifies minimum and recommended air quantities for the preservation of the occupants health, safety and well-being. Recommendations are given for different rooms in alltypes of building in terms of the outdoor air supply per minute. Also gives maximum concentrations of various contaminents. States that outdoor air requirement can be reduced if air is recirculated, purified or odour or gas removal equipment used, but in no case should be less than 5 c.f.m per person.

U.S. ventilation systems have been reported to require as much as 50-60% of total energy consumed in buildings and have become popular targets for energy conservation methods. Notes serious concern that arbitrary changes to codes and standards are being proposed in the name of energy conservation which could jeopardise health, safety or welfare of building occupants. Traces evolution of ventilation codes and standards in us.Treats difficulties encountered with measurement and direct control of indoor air quality. Notes common guide values for air contamination used.

Describes methods of calculating ventilation heat losses employed in several European countries. Compares them from standpoint of air change rates. Proposes calculation procedure for new Czechoslovak standard CSN 06 0210.

Describes new calculation procedure which forms a basis for 1978 draft in German Standard DIN 4701 "Building heat demand calculation". Defines infiltration heat loss. Examines previous German standard calculation procedure. Outlines basis of natural air flows in buildings in some detail including effect of air pressure and stack effects. Treats pressure distributions affected by wind and stack effects. Describes mass flow balances for 2 building types and infiltration heat losses.