The three common tracer injection strategies all proved reliable in a test chamber under complete mixing conditions. For field studies of air flow patterns in large rooms the step-up method or the pulse method is recommended to escape the initial complete mixing condition of the decay method.
Local age of air and air change effectiveness were determined in two office buildings using tracer gas techniques to study the air applicability of the associated measurement procedures in mechanically ventilated office buildings. Measurement issues examined include the establishment of a uniform tracer gas concentration at the start of the test and the relationship of ventilation system configuration and system operation to the test procedure.
The carbon dioxide concentration patterns in a large, high-rise, office building in Ottawa were examined experimentally using an automated data acquisition system. Daily C02 concentration profiles throughout the building and air change rates, using SF6 as a tracer gas, were measured at minimum outdoor air supply rates during much of a heating season.
This handbook describes the use of tracer-gas techniques for measurement of airflow in ducts. Initial measurements were carried out in the laboratory to examine the accuracy of these techniques. The mixing of tracer gases (eg, sulphur hexafluoride, SF6) in ducts of various shapes and sizes was examined using different types of tracer injector. Airflow estimated using tracer-gas techniques (eg, constant-injection, pulse-injection) was compared with measurements made with traditional instrumentation such as pitot-tubes and hot-wire anemometers.
Login