Airbase

AIRBASE is the Bibliographic Database of the AIVC. It contains publications and abstracts of articles related to energy efficient ventilation. Where possible, sufficient detail is supplied in the bibliographic details for users to trace and order the material via their own libraries. Topics include: ventilation strategies, design and retrofit methods, calculation techniques, standards and regulations, measurement methods, indoor air quality and energy implications etc. Entries are based on articles and reports published in journals, internal publications and research reports, produced both by university departments and by building research institutions throughout the world. AIRBASE has grown and evolved over many years (1979 to present day, over 22000 references and 16000 documents available online). For most of the references, the full document is also available online.

Access to the publications is free of charge.

Reviews results of tests carried out during a joint industry/university project. Discusses characteristics of single and two-component foam, airtightness, condensation and safety regulations since polyurethane foam contains isocyanates.
Elmroth A. Fallby B.
Tests carried out during the sixties and seventies showed that there was a correlation between lung cancer and the existence of radon gas in mines and that there was radon gas in homes built of aerated concrete based on slate.
Linder C.
Describes a procedure for measuring the transmission and ventilation heat losses of unoccupied houses and their solar heat gain. Internal temperatures, ventilation rate and weather data are measured.
Siviour J.B.
Describes an energy audit, developed to determine economically optimal retrofits for residential buildings, based on actual on-site measurements of key indices of the house.
Sonderegger R.C. Grimsrud D.T. Krinkel D.L.
Reports an experiment to assess the magnitude of air flow through the brickwork of one of the ECRC test houses. Describes apparatus and method and gives results.
Dickson D.J.
Reviews the important variables which need to be known when analyzing wind loads on low buildings. These include reference height, roof angle, end zones, internal pressures and openings, surrounding terrain and buildings.
Dalgliesh W. A.
The report was prepared, at the request of the Environmental Protection Agency by the Committee on Indoor Pollutants.
Committee on Indoor Pollutants.
This research report explores the possibilities for energy saving in municipal office buildings.
Ince M.E.
An effective way of reducing the transmission flows through windows during the heating season is to use the air extracted from the room to ventilate the air space between the glazings.
Krivobok E N
Reviews some of the cost effective techniques for energy conservation in new dwellings. Covers site layout and design, insulation of roofs, walls, doors and windows, ventilation control and control of condensation.
Jones R.D.
Measurements were made of the apparent volume flows in the mechanical ventilation system of a block of flats, along with the expected energy arising from domestic ventilation.
Phaff J.C. Ham Ph.J. Molenaar J.
Reports on an investigation concerning ventilation and energy conservation in dwellings, which was financed by the EEC and the Dutch Ministry for Housing and Public Works. Concludes that:< 1.
de Gids W.F.
Presents the results from a comprehensive empirical investigation of 1144 swedish buildings in which energy conservation measures eligible for Government funding assistance have been undertaken.
Swedish Council for Building Research.
Describes the use of SF6 tracer gas measurement techniques employed in airtightness and ventilation research at Princeton in terraced housing.
Blomsterberg A.
In many buildings the incoming ventilation air causes recirculating airflow. Diagrams show typical examples. The incoming air stream enters below the ceiling level and carries air from the building with it causing air movement greater than th
Nielsen P.V.
The primary aim of the project is to describe and document a measurement method suitable for checking whether minimum requirements for ventilation efficiency are fulfilled after a ventilation system has been regulated.
Pedersen J.
Describes a variation of the conventional tracer gas measurement technique for measuring air change rates.
Lundin L.
Reports on research project to study the effects of different methods of heating an office, temperature and draught conditions, ventilation efficiency and heat storage in joint structures.
Malmstrom T-G
Reviews the development of methods and results achieved.
Blomqvist C. et al

Pages