A new simple method is proposed here for the experimental singling out of the air flow patterns in a room. It is based on the use of a series of thermofoil probes, arranged in a lattice, that can be suspended at the ceiling of the room under test.
The concentrations of indoor pollutants should be maintained below recommended values at all occupied locations at any time. A design method based on minimal air change rates may not be satisfactory, since the ventilation effectiveness is determined not only by the nominal air exchange rate but also many other factors, such as the airflow pattern the space, location of contaminant sources, and properties of the contaminants. It is the objective of the present study to investigate numerically the effect of airflow patterns due to the various factors of ventilation effectiveness.
The flow rate in thermal plumes are influenced by many factors. Influence by enclosing walls is one of them. This article presents simple symmetry considerations to calculate the flow rate in such flows, and they are experimentally verified as regards wall plumes. When the flow takes place near to enclosing walls the entrainment is influenced and a reduction of the flow rate is observed. For displacement ventilation this means a reduction of the stipulated necessary ventilating air flow rate when an air quality based design method is used.
Simulation models basing on 2-dimensional finite-difference approach were developed for the steady-state and dynamic analyses of the thermal coupling of leakage airflows and building components. The considered types of leakage flows were crack flow and filtration through porous materials.
The computer programs published so far have enabled the calculation of airflows at constant temperatures or of air temperatures at constant airflows. The first version of a new microcomputer program has now been developed in which the airflows and temperatures are calculated simultaneously. The time dependency of temperatures, airflows and contaminant concentrations is considered in the calculation method. The source strength of contaminants, outdoor air temperature, wind velocity and direction, convection and radiation loads can all be freely scheduled.
Numerical modelling is performed to predict air movement, thermal comfort level and contamination distribution within an open office space. The office located in the building interior has a concentrated thermal load at its center and is conditioned by cool air delivered from a ceiling-mounted linear diffuser. the air velocity and temperature distributions and contaminant dispersion in the office are calculated for three different cooling loads and air exchange rates with a three-dimensional turbulent finite difference model.
Results of 3-D computational fluid dynamic simulations of the air flows, temperature distribution and contaminant remove efficiencies for typical workstation configurations which include the option for localized supply of outdoor air will be presented. A typical office configuration including desks, partitions, localized heat and contaminant sources will be modelled. The results will be compared to similar simulations the same workstation environment using ceiling supply and return plenum configurations.
Login