English

This study aims to evaluate the performances of a VMI, a demand-controlled mechanical supply ventilation system, in an experimental house, in terms of indoor air quality (IAQ), energy performance and thermal comfort. The positive input ventilation draws fresh air from the outside, filters and preheats or precools it before blowing it every dry rooms. The air circulates through doors’ undercuts and is naturally extracted thanks to exhaust orifices in every wet rooms. A heat exchanger supplied with water from a reversible heat pump is used to preheat or precool the blown air.

This study is a first large-scale analysis of the performance of a cloud connected and smart residential mechanical extract ventilation (MEV) system based on field data. About 350 units were analysed over a period of 4 months from December 2018 up to March 2019, corresponding with the main winter period in Belgium. Half of the units were installed as a smartzone system which means additional mechanical extraction from habitable rooms as bedrooms. 

Thermal comfort and sensation are important aspects of the building design and indoor climate control as modern man spends most of the day indoors. Conventional indoor climate design and control approaches are based on static thermal comfort/sensation models that views the building occupants as passive recipients of their thermal environment. Assuming that people have relatively constant range of biological comfort requirements, and that the indoor environmental variables should be controlled to conform to that constant range.

The French ongoing research project “Durabilit'air” (2016-2019) aims at improving our knowledge on the variation of buildings airtightness through onsite measurement and accelerated ageing in laboratory controlled conditions. This paper presents the final results of the second task of the project. This task deals with the quantification and qualification of the durability of building airtightness of single detached houses. It is done through field measurement at mid-term (MT) and long-term (LT) scales.  

The airtightness of new buildings has significantly improved in the last two decades thanks to building energy performance regulations. However, until now, low knowledge is available about the evolution of buildings’ envelope airtightness. This work deals with the durability of buildings airtightness, and focuses on ways to better characterize it.

Wood is a hygroscopic material, it has the ability to adsorb or desorb water in response to the ambient relative humidity. Thus, the ambient air will affect the moisture content of the wood, and in turn, the dimension of the wood. If the wood itself is part of the air barrier in a construction, the shrinking and expansion can create gaps in the construction, for example in the window sill. In case of an air barrier consisting of a foil, the joints in the foil can be clamped by wooden joists, or the foil can be taped to wooden part.

The association between indoor air quality (IAQ) and sleep quality was investigated in this study. A total of 27 participants (14 males and 13 females, 20-33 yrs.) without any sleep disorders and chronic diseases were recruited and divided into two groups: a polysomnography (PSG) group and a non-PSG group. The IAQ was changed by opening or closing windows. There were two phases for the experiment and two nights in each phase including one adaptive night and one test night, and around one-week washout period between two phases.

More than 20 years of one’s life is spent in the bedroom when sleeping. Sleep quality is essential for our health, well-being and next-day performance. However, there is very little information on how bedroom air quality affects the quality of sleep. One of the reason could be that the accurate measurements of the quality of sleep have been the domain of sleep research groups and sleep laboratories using polysomnography. In the recent years, however, many low-cost sleep monitors and actigraphs made their way into the market.

The indoor air quality is very important for the well-being of occupants, especially in the case of young babies. This research focuses on the air quality of the surrounding air inside a crib with sleeping infants. To study the effects of different sleeping positions of the baby with in the crib a measurement setup was created in the laboratory. The breathing of an infant was simulated by means of a baby doll with air supply mixed with CO2 and measured at different sensor locations for different sleeping positions.

The estimation of low-rise, residential building infiltration rates using envelope airtightness values from whole building fan pressurization tests has been the subject of much interest and research for several decades, constituting a major topic of discussion during the early years of the AIVC. A number of empirical and model-based methods were developed, with their predictive accuracy evaluated in field studies around the world.