English

Eight published post-occupancy surveys have focused on building services and energy performance, management, and occupant satisfaction in buildings of technical interest. All the buildings are relatively good; and two of them had unusually high occupant satisfaction: a sophisticated deep-plan air-conditioned office which demanded (and received) a high level of management; and a simple, low energy, largely naturally-ventilated medical centre, in which occupants were prepared to forgive some deficiencies in lighting, ventilation and summertime temperatures.

Providing Quality for People has many aspects. Of these, one is providing buildings that give clients and users better value for their money. Another addresses the issues of preserving our heritage upon which our quality of life based. This paper describes how these can be achieved using the application of innovative design concepts supported by advanced analytical techniques. For the majority of archive repositories, storing as they do paper type material, environmental conditions of 60±5% and 15.5±2.5 °C are recommended by British Standard 5454.

Air conditioning, as we know it, providing thermal comfort by mechanical means, first appeared in buildings about one hundred years ago. During that time it has had major influence on the evolution of the design buildings. This paper reviews the development of providing cool comfort in office buildings from the pre-active era of the middle of the 19th century through the rise of air conditioning in the mid 20th century to the current state of the art.

Providing people with a quality indoor environment means full air conditioning with an energy use tag that we would rather not mention in the debate about environmental impact and sustainability. But is this really the case? Is it not possible to design mechanical systems so they use less energy than their naturally ventilated counterparts? The law of conservation of energy means we can use the same energy repeatedly. As long as we are aware of how energy is degraded in quality and temperature terms, we can design systems that repeatedly recover and reuse energy.

Measurements on three gas and two electric furnaces have been made to examine the field performance of these furnaces and their interactions with their forced-air distribution systems. The distribution systems were retrofitted as part of this study, and the impact of retrofitting on furnace performance is discussed. In addition to field measurements, this paper discusses how forced-air furnace systems are treated in proposed ASHRAE Standard l 52P and applies the resulting equations to the systems tested in the field.

A number of systems exist for ventilation of residential buildings. In general, they can be categorized as supply, exhaust, or balanced ventilation systems. Subcategories include integration into central air distribution ducts, or single- or multi-point air distribution. This effort focused on establishing a design methodology for centrally integrated supply ventilation systems using an outside air duct to the return side of a central air distribution fan.

In recent years there has been a gradual re-emergence of the use of passive or 'low energy' ventilation and cooling techniques including mixed mode application. It is apparent that many clients developers and agents are reluctant to make a commitment to such 'low energy' buildings due to concerns, albeit unsubstantiated by hard evidence, that such buildings will provide acceptable comfort levels for occupants.

Temperature and cooling demand in a room summertime are influenced by numerous factors,like internal gains, ventilation, solar gain, behaviour of occupants, thermal inertia of the roomand outdoor conditions (climate).The thermal environment and cooling demand summertime are often analysed using detailedcomputer programs, which take into account the factors mentioned above (among others).Often the overview, transparency and some of the physical insight is lost using these advancedcomputer programs.In a predesign phase of a project it is preferable to do simple calculations of the thermalbeha

Describes the development of the Swedish duct tightness guidelines, the "AMA system". The latest version, due in 1998, aims to increase tightness requirements once again by introducing a tightness class D as the standard requirement for larger spiroduct systems. The concern about an increasing part of the Swedish population becoming allergic and asthmatic led to the Swedish Parliament introducing compulsory inspections of ventilation systems in 1990.

This paper describes the design and development of the natural ventilation system of the new Contact Theatre Complex Manchester, UK, designed by A Goldrick of Short Ford Associates. The ventilation design is based on a stack dominant system using an "H-Pot" chimney configuration. The paper describes the development of the ventilation design of both the studio theatre and main auditorium ventilation systems.